Professors—D'Orazio, Franco, Ganji, Holton, Hu, Krishnan, Liou, Owen, Shahnasser, Sinha, Tarakji, Wheeler
Associate Professors—Enssani, Pong
Assistant Professors—Chen, Cheng, Cooklev, Holden, Mahmoodi, Teh
B.S. in Civil Engineering
B.S. in Computer Engineering
B.S. in Electrical Engineering
B.S. in Mechanical Engineering
Minor in Civil Engineering
Minor in Computer Engineering
Minor in Electrical Engineering
Minor in Mechanical Engineering
M.S. in Engineering
The mission of the School of Engineering is to educate students from a diverse and multicultural population to become productive members of the engineering profession and society at large. The following four educational objectives stem from this mission: (1) graduates from the engineering programs will have the analytical and technical abilities necessary to work and advance in the profession of engineering; (2) graduates from the engineering programs will be prepared for their field of specialty and will be informed of recent technical advances in their field; (3) graduates from the engineering programs will be cognizant of societal issues and their role as future professional engineers working for the general benefit of society; (4) the School of Engineering will provide a culture that supports students in their academic and professional development, and will continue development of existing and new programs.
The School of Engineering offers Bachelor of Science programs in Civil, Computer, Electrical, and Mechanical Engineering, as well as a minor program in each discipline. Descriptions of the four major and minor programs follow this general introduction.
Civil engineering is concerned with the building of civil and environmental facilities, which are essential for the commerce of our society. Civil engineers design and construct bridges, buildings, wastewater treatment plants, water supply facilities, hazardous waste facilities, and transportation systems. The program at San Francisco State University provides a broad and practical education which prepares students for civil engineering employment and (for those who qualify) for graduate studies.
Computer engineering combines electrical engineering and computer science and deals with the design and application of computer systems. These computer systems can range from super computers to tiny microprocessors that are embedded in all kinds of apparatus such as automobiles, appliances, cellular phones, medical devices, office equipment, etc. The computer engineering program teaches students about computer hardware, software, integration, interfacing and applications with a strong emphasis on analysis and design. Hence, students pursuing a computer engineering degree must have a solid foundation in mathematics and physical sciences. Students develop problem-solving and decision-making skills as well as an appreciation for the impact of technology in society. Graduates of the program can seek employment immediately, or can continue studies for an advanced degree in computer engineering, computer science, electrical engineering, or other areas such as business, law, or medicine.
Electrical engineering is the profession that deals with the design and analysis of electrical and electronic devices and systems. This branch of engineering covers many diverse areas, including electrical power generation and distribution, the design and fabrication of electronic semiconductor devices, and the creation of components and systems for consumer, medical, telecommunications and many other applications. Graduates with a B.S. in Electrical Engineering have a number of options available to them. They may engage in the analysis, modeling, simulation, design, testing, manufacturing, or field services of electrical, electronic, or magnetic equipment. Persons interested in research, development, or college-level teaching may return to universities for advanced degrees in a specified area of electrical engineering.
Mechanical engineering is the field responsible for the design of machines and devices used throughout society. Industries involved in the generation of electricity; in petroleum production; and in the design and manufacture of electronics, aircraft, automobiles, consumer and industrial products typically employ large numbers of mechanical engineers. Mechanical engineers are also employed by companies involved in automated manufacturing as well as robotics and control. The program at San Francisco State University prepares the student to enter into professional employment directly after graduation in addition to providing the needed foundation for graduate study.
Recognizing the value to certain students majoring in science broadening their education to include applications of their backgrounds in science to real-world physical systems, four minors in engineering are offered.
The master's program includes primary curricular areas of specialization in civil and electrical engineering from which the student may choose his/her program of study upon advisement. The objectives of the program are to provide students with the advanced engineering education necessary for solving complex problems in engineering practice and to provide opportunities for updating and upgrading the skills of practicing engineers. These objectives are accomplished by a flexible program to meet individual student needs.
Graduates with a B.S. in Civil Engineering may engage in the design and construction of buildings, bridges, roads, dams, water supply facilities, and environmental facilities for treating wastewater and hazardous wastes. Civil engineers find employment with industrial firms, government agencies, utilities, and public works departments, as well as engineering firms which consult for these enterprises. After gaining practical experience, some civil engineers form their own consulting firms.
Computing engineering is the profession that deals with computer hardware/software design, integration, interfacing, and application. It is the fastest growing engineering profession, and it impacts all aspects of our lives. Since computers are everywhere, from super computers to embedded microprocessors, computer engineers are needed in design, development, testing, marketing, and technical support of a wide variety of industries. Examples of major industries that employ computer engineers include computers, semiconductors, instrumentation, communications, networks, medical equipment, manufacturing, automobile, etc.
Graduates with a B.S. in Electrical Engineering may engage in the analysis, modeling, simulation, design, testing, manufacturing, or field services of electrical, electronic, or magnetic equipment. They may also engage in the operation and maintenance of facilities for electrical power generation or telecommunication. High technology companies employ electrical engineers in the fields of electronic and computer manufacturing, as well as in power generation and communications.
Graduates with a B.S. in Mechanical Engineering may immediately engage in the design, analysis, testing, production, and maintenance of machines and mechanical systems. Most industries such as aerospace, manufacturing, automotive, chemical, power generation, agriculture, food processing, textile, and mining employ mechanical engineers.
Engineers interested in research, development, or college-level teaching return to college for an M.S. or Ph.D. in their specified field. Engineers interested in management and business aspects may return to college for a Master of Business Administration.
Freshman applicants should complete four years of mathematics, one year of chemistry, and one year of physics in high school. Students are also encouraged to include courses in mechanical drawing and computer programming.
Community college transfers should complete the sequence of mathematics, chemistry, physics, and engineering courses listed in freshman and sophomore years under the "sample sequence of courses," if available at the community college.
The Bachelors of Science in Civil, Computer, Electrical, and Mechanical Engineering require 132 semester units. Major requirements including mathematics, chemistry, and physics prerequisites are 99 units. For civil and mechanical engineering, 51 of the required units are lower division and 48 units are upper division. For electrical engineering, 50 of the required units are lower division and 49 units are upper division. For computer engineering, 47 of the required units are lower division and 52 units are upper division. The remaining 33 units satisfy the balance of the university requirements including communication skills and general education in humanities and social sciences. Students are advised that, except for some G.E. courses, all courses which are to be counted toward completion of an engineering degree must be taken for a letter grade; the CR/NC option may not be used in this context.
Recognizing the need of the professional engineer to participate in facets of problem solving that extend beyond technical and economic considerations, the General Education requirement for engineering students includes 33 units in courses other than mathematics, natural sciences, and business. Students have the option of following either the university General Education program or the School of Engineering General Education program. The School of Engineering G.E. program permits a student to use courses required for the engineering majors to satisfy some of the G.E. requirements, so that the total number of units outside of major requirements is reduced. Students should inquire at the School of Engineering office about the approved General Education requirements for engineering majors.
Courses are scheduled during the day as well as in the late afternoon and evening. Other information and assistance in selecting courses can be obtained from a major adviser in the School of Engineering, or by calling 415/338-1174, by e-mail to engineer@sfsu.edu, or by writing to School of Engineering, San Francisco State University, Science Building, 1600 Holloway Avenue, San Francisco, CA 94132.
On-line course descriptions are available.
The curriculum provides a broad-based common core of engineering science and the essential civil engineering subjects. The students conclude with eleven units of electives where primary emphasis is placed on design, practical applications, and computer solutions in selected areas of civil engineering.
At least fifteen units of 400-level courses and engineering electives must be completed at SFSU, except with prior approval from an adviser and the head of the civil engineering program. Upper-division courses in the major must be completed within ten years of graduation.
The number of units required for graduation and the General Education requirements are described in the Undergraduate Education section of this Bulletin. For information for all engineering students, see Undergraduate Programs in Engineering above.
Sample Sequence of Courses | Units | |
First Semester | ||
CHEM 115 | General Chemistry I: Essential Concepts of Chemistry | 5 |
MATH 226 | Calculus I | 4 |
ENGR 100 | Introduction to Engineering | 1 |
ENGR 101 | Engineering Graphics | 1 |
ENG 114 | First Year Written Composition | 3 |
U.S. History/Government course (may be satisfied by examinations) | 3-6 | |
Total | 17 | |
Second Semester | ||
MATH 227 | Calculus II | 4 |
PHYS 220/222 | General Physics with Calculus I/Laboratory (3/1) | 4 |
ENGR 103 | Introduction to Computers | 1 |
ENGR 106 | Introduction to Engineering Laboratory | 1 |
G.E. Course | 3 | |
G.E. Oral Communication course | 3 | |
Total | 16 | |
Third Semester | ||
MATH 228 | Calculus III | 4 |
PHYS 230/232 | General Physics with Calculus II/Laboratory (3/1) | 4 |
ENGR 102 | Statics | 3 |
ENGR 200 | Materials of Engineering | 3 |
ENG 214 | Second Year Written Composition | 3 |
Total | 17 | |
Fourth Semester | ||
MATH 245 | Elementary Differential Equations and Linear Algebra | 3 |
PHYS 240/242 | General Physics with Calculus III/Laboratory (3/1) | 4 |
ENGR 201 | Dynamics | 3 |
ENGR 205 | Electric Circuits | 3 |
ENGR 235 | Surveying | 3 |
Total | 16 | |
Fifth Semester | ||
ENGR 300 | Engineering Experimentation | 3 |
ENGR 304 | Mechanics of Fluids | 3 |
ENGR 309 | Mechanics of Solids | 3 |
ENGR 436 | Transportation Engineering | 3 |
G.E. Courses | 6 | |
Total | 18 | |
Sixth Semester | ||
ENGR 302 | Experimental Analysis | 1 |
ENGR 323 | Structural Analysis | 3 |
ENGR 429 | Construction Management | 3 |
ENGR 430 | Soil Mechanics | 3 |
ENGR 434 | Principles of Environmental Engineering | 3 |
G.E. Course | 3 | |
Total | 16 | |
Seventh Semester | ||
ENGR 696 | Engineering Design Project I | 1 |
Engineering Electives | 9 | |
Technical Elective | 3 | |
G.E. Course | 3 | |
Total | 16 | |
Eighth Semester | ||
ENGR 697 | Engineering Design Project II | 2 |
Engineering Electives | 8 | |
G.E. Courses | 6 | |
Total | 16 |
Choice of upper division electives must present a clearly identifiable educational objective and ensure that the program requirements in engineering science and design are met by all students. Distribution of credit units among engineering science and design is given in the Advising Guide. A study plan of intended upper division electives must be approved by the student's adviser and the program head of civil engineering prior to the seventh semester of the engineering program.
A total of twenty units from the following list of courses is required, subject to the minimum number of units specified for each group. Courses numbered 800 and above are available to qualified undergraduates.
Engineering Electives (17 units) | |
ENGR 303 | Engineering Thermodynamics |
ENGR 308 | Computer Methods in Engineering |
ENGR 425 | Reinforced Concrete Structures |
ENGR 426 | Steel Structures |
ENGR 427 | Wood Structures |
ENGR 428 | Applied Stress Analysis |
ENGR 431 | Foundation Engineering |
ENGR 432 | Finite Element Methods |
ENGR 435 | Environmental Engineering Design |
ENGR 439 | Construction Engineering |
ENGR 461 | Mechanical and Structural Vibrations |
ENGR 468 | Applied Fluid Mechanics and Hydraulics |
ENGR 698 | Engineering Seminar (1-3) |
ENGR 699 | Special Study in Engineering (1-3) |
ENGR 830 | Finite Element Methods in Structural Continuum Mechanics |
ENGR 833 | Principles of Earthquake Engineering |
ENGR 836 | Structural Design for Earthquakes |
ENGR 837 | Geotechnical Earthquake Engineering |
Selected graduate course upon approval | |
Technical Electives (3 units) | |
ENGR 610 | Engineering Cost Analysis |
GEOL 430 | Structural Geology (4) |
GEOL 456 | Soils Geology |
GEOL 474 | Engineering Geology |
GEOL 475 | Hydrogeology |
MATH 340 | Probability and Statistics |
CHEM 380 | Chemistry Behind Environmental Pollution |
DS 601 | Applied Management Science |
Computer engineering is a multidisciplinary field with roots in electrical engineering and computer science that has grown to become a separate discipline in itself. The first two years of the program are designed to build a strong background in mathematics and science to provide a basis for understanding the underlying analysis and modeling tools and physical principles that are common to all engineering. The last two years cover a rich set of hardware and software subjects to give students a broad background in computer engineering. This broad foundation enables students to adapt and extend their knowledge and skills more easily in the future. The curriculum also stresses problem solving skills and teamwork. Through electives, students can choose to develop further breadth or in-depth knowledge in one of three areas: embedded systems, network systems, or multimedia systems.
The number of units required for graduation and the General Education requirements are described in the Undergraduate Education section of this Bulletin. For information for all engineering students, see Undergraduate Programs in Engineering above.
A number of required and elective lecture courses in the computer engineering program have corresponding laboratory courses that students are either required or strongly encouraged to take concurrently. These course pairs are:
ENGR 205 (Electric Circuits) and
ENGR 206 (Circuits and Instrumentation Laboratory)ENGR 353 (Electronics) and
ENGR 301 (Electronics Laboratory)ENGR 356 (Basic Computer Architecture) and
ENGR 357 (Basic Digital Laboratory)ENGR 447 (Control Systems) and
ENGR 446 (Control Systems Laboratory)
Students who drop or withdraw from any of these lecture courses must also drop or withdraw from the corresponding laboratory course, or they will be administratively dropped or withdrawn.
Sample Sequence of Courses | Units | |
First Semester | ||
CHEM 115 | General Chemistry I: Essential Concepts of Chemistry | 5 |
MATH 226 | Calculus I | 4 |
ENGR 120 | Introduction to Computer Engineering | 3 |
ENG 114 | First Year Written Composition | 3 |
Total | 15 | |
Second Semester | ||
MATH 227 | Calculus II | 4 |
PHYS 220/222 | General Physics with Calculus I/Laboratory (3/1) | 4 |
CSC 212 | Introduction to Software Development in Unix | 2 |
U.S. History/Government course(s) (may be satisfied by examinations) | 3-6 | |
G.E. Oral Communication Course | 3 | |
Total | 16 | |
Third Semester | ||
MATH 228 | Calculus III | 4 |
PHYS 230/232 | General Physics with Calculus II/Laboratory (3/1) | 4 |
CSC 210 | Introduction to Computer Programming | 3 |
ENG 214 | Second Year Written Composition | 3 |
G.E. Course | 3 | |
Total | 17 | |
Fourth Semester | ||
MATH 245 | Elementary Differential Equations and Linear Algebra | 3 |
PHYS 240/242 | General Physics with Calculus III/Laboratory (3/1) | 4 |
CSC 213 | Fundamentals of Computer Science | 3 |
ENGR 205 | Electric Circuits | 3 |
ENGR 206 | Circuits and Instrumentation Laboratory | 1 |
G.E. Oral Communication course | 3 | |
Total | 17 | |
Fifth Semester | ||
CSC 330 or MATH 330 |
Discrete Mathematical Structures for Computer Science | 3 |
ENGR 300 | Engineering Experimentation | 3 |
ENGR 305 | Linear Systems Analysis | 3 |
ENGR 356 | Basic Computer Architecture | 3 |
ENGR 357 | Basic Digital Laboratory | 1 |
G.E. Course | 3 | |
Total | 16 | |
Sixth Semester | ||
CSC 313 | Data Structure | 3 |
ENGR 301 | Electrical Measurements | 1 |
ENGR 353 | Electronics | 3 |
ENGR 378 | Digital Systems Design | 3 |
ENGR 478 | Design with Microprocessors | 4 |
G.E. Course | 3 | |
Total | 17 | |
Seventh Semester | ||
CSC 413 | Software Development | 3 |
ENGR 456 | Computer Systems | 3 |
ENGR 476 | Computer Networks | 3 |
ENGR 691 | Computer Engineering Seminar | 2 |
Technical Elective | 3 | |
G.E. Course | 3 | |
Total | 17 | |
Eighth Semester | ||
ENGR 451 | Digital Signal Processing | 4 |
ENGR 692 | Engineering Design Project | 4 |
Technical Elective | 3 | |
G.E. Courses | 6 | |
Total | 17 |
Choice of upper division electives must demonstrate a clearly identifiable educational objective and have an adviser's approval. A study plan of intended upper division electives must be approved by the student's adviser and the program coordinator for computer engineering prior to registering for ENGR 691. In addition to ENGR 691 and ENGR 692, at least 15 of the senior-level (400 or above) computer engineering units must be completed at SFSU. Upper division (300 or above) computer engineering courses must have been taken within five years of graduation.
A total of six units from the following list of courses is required.
ENGR 306 | Electromechanical Systems |
ENGR 350 | Engineering Electromagnetics |
ENGR 442 | Operational Amplifiers Systems Design |
ENGR 443 | Multimedia Systems |
ENGR 446 | Control Systems Laboratory |
ENGR 447 | Control Systems |
ENGR 449 | Communication Systems |
ENGR 453 | Digital Integrated Circuit Design (4) |
ENGR 454 | High-speed Circuit Board Design |
ENGR 455 | Power Electronics (4) |
ENGR 479 | Real-time Systems |
CSC 510 | Analysis of Algorithms I |
CSC 415 | Operating System Principles |
CSC 620 | Natural Language Processing |
CSC 630 | Computer Graphics Systems Design |
CSC 635 | Software Techniques for Computer Music |
CSC 640 | Software Engineering |
CSC 642 | Human Computer Interation |
CSC 645 | Computer Networks |
CSC 650 | Secured Network Systems |
CSC 665 | Artificial Intelligence |
CSC 667 | Internet Application Design and Development |
CSC 668 | Object Oriented Programming |
The required upper division courses provide a broad and basic understanding of the main fields in electrical engineering. Upon advisement, each student may choose an area of specialization in the senior year in communications, computers, electronics, control/robotics, or power engineering.
The number of units required for graduation and the General Education requirements are described in the Undergraduate Education section of this Bulletin. For information for all engineering students, see Undergraduate Programs in Engineering above.
A number of required and elective lecture courses in the electrical engineering program have corresponding laboratory courses that students are either required or strongly encouraged to take concurrently. These course pairs are:
ENGR 205 (Electric Circuits) and
ENGR 206 (Circuits and Instrumentation Laboratory)ENGR 305 (Linear Systems Analysis) and
ENGR 315 (Linear Systems Analysis Laboratory)ENGR 353 (Electronics) and
ENGR 301 (Electronics Laboratory)ENGR 356 (Basic Computer Architecture) and
ENGR 357 (Basic Digital Laboratory)ENGR 415 (Mechatronics) and
ENGR 416 (Mechatronics Laboratory)ENGR 447 (Control Systems) and
ENGR 446 (Control Systems Laboratory)
Students who drop or withdraw from any of these lecture courses must also drop or withdraw from the corresponding laboratory course, or they will be administratively dropped or withdrawn.
Sample Sequence of Courses | Units | |
First Semester | ||
CHEM 115 | General Chemistry I: Essential Concepts of Chemistry | 5 |
MATH 226 | Calculus I | 4 |
ENGR 100 | Introduction to Engineering | 1 |
ENGR 106 | Introduction to Engineering Laboratory | 1 |
ENG 114 | First Year Written Composition | 3 |
U.S. History/Government course (may be satisfied by examinations) | 3-6 | |
Total | 17 | |
Second Semester | ||
MATH 227 | Calculus II | 4 |
PHYS 220/222 | General Physics with Calculus I/Laboratory (3/1) | 4 |
CSC 210 | Introduction to Computer Programming | 3 |
G.E. Course | 3 | |
G.E. Oral Communication course | 3 | |
Total | 17 | |
Third Semester | ||
MATH 228 | Calculus III | 4 |
PHYS 230/232 | General Physics with Calculus II/Laboratory (3/1) | 4 |
Units selected from the following mechanical engineering electives: | 3 | |
ENGR 201 | Dynamics | |
ENGR 203 | Materials of Electrical and Electronic Engineering | |
ENGR 204 | Engineering Mechanics | |
ENGR 303 | Engineering Thermodynamics | |
G.E. Elective | 3 | |
ENG 214 | Second Year Written Composition | 3 |
Total | 17 | |
Fourth Semester | ||
MATH 245 | Elementary Differential Equations and Linear Algebra | 3 |
PHYS 240/242 | General Physics with Calculus III/Laboratory (3/1) | 4 |
ENGR 205 | Electric Circuits | 3 |
ENGR 206 | Circuits and Instrumentation Laboratory | 1 |
ENGR 290 | Modular Elective (MATLAB or Pspice) | 1 |
G.E. Electives | 6 | |
Total | 18 | |
Fifth Semester | ||
ENGR 300 | Engineering Experimentation | 3 |
ENGR 301 | Electronics Laboratory | 1 |
ENGR 305 | Linear Systems Analysis | 3 |
ENGR 315 | Linear Systems Analysis Laboratory | 1 |
ENGR 353 | Electronics | 3 |
ENGR 356 | Basic Computer Architecture | 3 |
ENGR 357 | Basic Digital Laboratory | 1 |
Total | 15 | |
Sixth Semester | ||
ENGR 306 | Electromechanical Systems | 3 |
ENGR 442 | Operational Amplifier System Design | 3 |
ENGR 451 | Digital Signal Processing | 4 |
ENGR 478 | Design with Microprocessors | 4 |
G.E. Course | 3 | |
Total | 17 | |
Seventh Semester | ||
ENGR 350 | Introduction to Engineering Electromagnetics | 3 |
ENGR 446 | Control Systems Laboratory | 1 |
ENGR 447 | Control Systems | 3 |
ENGR 449 | Communication Systems | 3 |
ENGR 696 | Engineering Design Project I | 1 |
Engineering Elective | 3 | |
G.E. Course | 3 | |
Total | 17 | |
Eighth Semester | ||
ENGR 697 | Engineering Design Project II | 2 |
Engineering Electives | 6 | |
Technical Elective | 3 | |
G.E. Course | 3 | |
Total | 14 |
Choice of upper division electives must present a clearly identifiable educational objective and ensure that the program requirements in engineering science and design are met by all students. Distribution of credit units among engineering science and design is given in the Advising Guide. A study plan of intended upper-division electives must be approved by the student's adviser and the program coordinator for Electrical Engineering prior to the seventh semester of the engineering program and must include at least two senior-level laboratories. At least fifteen of the 400-level engineering units must be completed at SFSU. Upper division courses must have been taken within five years of graduation.
A total of nine units of engineering electives and three units of technical electives from the following list of courses is required.
Engineering Electives (9 units) | |
ENGR 378 | Digital Systems Design |
ENGR 410 | Instrumentation and Process Control |
ENGR 411 | Instrumentation and Process Control Laboratory (1) |
ENGR 415 | Mechatronics |
ENGR 416 | Mechatronics Laboratory (1) |
ENGR 445 | Analog Integrated Circuit Design (4) |
ENGR 448 | Electrical Power Systems |
ENGR 450 | Electromagnetic Waves |
ENGR 452 | Communications Laboratory (1) |
ENGR 453 | Digital Integrated Circuit Design (4) |
ENGR 455 | Power Electronics (4) |
ENGR 456 | Computer Systems |
ENGR 457 | Electromagnetics Compatibility |
ENGR 458 | Industrial and Commercial Power Systems |
ENGR 459 | Power Engineering Laboratory (1) |
ENGR 476 | Computer Communication and Networks |
ENGR 698 | Engineering Seminar (1-3) |
ENGR 699 | Special Study in Engineering (1-3) |
Technical Electives (3 units) | |
CSC 410 | Data Structures |
CSC 415 | Operating System Principles |
CSC 610 | Sorting and Searching |
CSC 630 | Computer Graphics Systems Design |
PHYS 450 | Introduction to Solid State Physics |
ENGR 610 | Engineering Cost Analysis |
DS 601 | Applied Management Science |
MATH 341 | Probability Theory |
MATH 342 | Mathematical Statistics |
MATH 374 | Advanced Calculus |
MATH 379 | Partial Differential Equations |
MATH 380 | Introduction to Functions of a Complex Variable |
MATH 430 | Operations Research: Deterministic Methods |
The required courses provide a thorough grounding in the essentials of mechanical engineering. Elective courses taken as part of one of the areas of emphasis allow for specialization. The areas of emphasis currently offered are mechanical design, thermal-fluids systems, and robotics and control.
Thirty units must be earned in residence at SFSU. Twenty-four of these units must be upper division courses and twelve of these upper division units must be in the major.
The number of units required for graduation and the General Education requirements are described in the Undergraduate Education section of this Bulletin. For information common to all engineering students, see Undergraduate Programs in Engineering above.
Sample Sequence of Courses | Units | |
First Semester | ||
CHEM 115 | General Chemistry I: Essential Concepts of Chemistry | 5 |
MATH 226 | Calculus I | 4 |
ENGR 100 | Introduction to Engineering | 1 |
ENGR 101 | Engineering Graphics | 1 |
ENG 114 | First Year Written Composition | 3 |
U.S. History/Government courses (may be satisfied by examinations) | 3-6 | |
Total | 17 | |
Second Semester | ||
MATH 227 | Calculus II | 4 |
PHYS 220/222 | General Physics with Calculus I/Laboratory (3/1) | 4 |
ENGR 103 | Introduction to Computers | 1 |
G.E. Course | 3 | |
G.E. Oral Communication course | 3 | |
Total | 15 | |
Third Semester | ||
MATH 228 | Calculus III | 4 |
PHYS 230/232 | General Physics with Calculus II/Laboratory (3/1) | 4 |
ENGR 102 | Statics | 3 |
ENGR 200 | Materials of Engineering | 3 |
ENG 214 | Second Year Written Composition | 3 |
Total | 17 | |
Fourth Semester | ||
MATH 245 | Elementary Differential Equations and Linear Algebra | 3 |
PHYS 240/242 | General Physics with Calculus III/Laboratory (3/1) | 4 |
ENGR 201 | Dynamics | 3 |
ENGR 205 | Electric Circuits | 3 |
ENGR 206 | Circuits and Instrumentation Laboratory | 1 |
Core Electives | 3 | |
Total | 17 | |
Fifth Semester | ||
ENGR 300 | Engineering Experimentation | 3 |
ENGR 303 | Engineering Thermodynamics | 3 |
ENGR 305 | Linear Systems Analysis | 3 |
ENGR 309 | Mechanics of Solids | 3 |
G.E. Courses | 6 | |
Total | 18 | |
Sixth Semester | ||
ENGR 302 | Experimental Analysis | 1 |
ENGR 304 | Mechanics of Fluids | 3 |
ENGR 364 | Materials and Manufacturing Processes | 3 |
Engineering Elective | 3 | |
Technical Elective | 3 | |
G.E. Course | 3 | |
Total | 16 | |
Seventh Semester | ||
ENGR 464 | Mechanical Design | 3 |
ENGR 467 | Heat Transfer | 3 |
ENGR 696 | Engineering Design Project I | 1 |
Units selected from the following, depending on area of emphasis: | 4 | |
ENGR 446/447 | Control Systems/Lab | |
ENGR 410/411 | Process Instrumentation and Control/Lab | |
G.E. Course | 3 | |
Engineering Elective | 3 | |
Total | 17 | |
Eighth Semester | ||
ENGR 463 | Thermal Power Systems | 3 |
ENGR 697 | Engineering Design Project II | 2 |
Engineering Elective | 4 | |
G.E. Courses | 6 | |
Total | 15 |
ENGR 290 | Modular Electives (Various 1-unit contemporary topics) |
3 |
Choice of upper division electives must present a clearly identifiable educational objective and ensure that the program requirements in engineering science and design are met by all students. Distribution of credit units among engineering science and design is given in the Advising Guide. A study plan of intended upper division electives must be approved by the student's adviser and the program head for mechanical engineering prior to the seventh semester of the engineering program.
A total of thirteen units from the following list of courses is required, subject to the minimum number of units specified for each group.
Engineering Electives (10 units) | |
ENGR 306 | Electromechanical Systems |
ENGR 308 | Computer Methods |
ENGR 410 | Instrumentation and Process Control |
ENGR 411 | Instrumentation and Process Control Laboratory (1) |
ENGR 415 | Mechatronics |
ENGR 416 | Mechatronics Laboratory (1) |
ENGR 428 | Applied Stress Analysis |
ENGR 432 | Finite Element Methods |
ENGR 446 | Control Systems Laboratory |
ENGR 447 | Control Systems |
ENGR 461 | Mechanical and Structural Vibration |
ENGR 465 | Principles of HVAC |
ENGR 466 | Gas Dynamics and Boundary Layer Flow |
ENGR 468 | Applied Fluid Mechanics and Hydraulics |
ENGR 698 | Engineering Seminar (1-3) |
ENGR 699 | Special Study in Engineering (1-2) |
Technical Electives (3 units) | |
MATH 430 | Operations Research: Deterministic Measurements |
ENGR 610 | Engineering Cost Analysis |
DS 601 | Applied Management Science |
An upper division business, mathematics, or physics course with prior permission of program head |
The purpose of the minor in Civil Engineering is to give students with sufficient background in mathematics, physics and chemistry, a fundamental understanding of the field of civil engineering. The minor should be of special interest to students in Geosciences (foundations and earthquake), Environmental Studies, Physics, Math, Computer Science, and other engineering fields. Students interested in the Civil Engineering minor must meet with the Program Head of Civil Engineering and complete the Civil Engineering Minor Program Approval Form. Revision of the form requires the approval of the Program Head.
The minor is intended for students who have satisfied the following prerequisite requirements:
MATH 226 | Calculus I (4) |
MATH 227 | Calculus II (4) |
PHYS 220/222 | General Physics with Calculus I & Lab (4) |
PHYS 240/232 | General Physics with Calculus III & Lab (4) |
CHEM 115 | General Chemistry I: Essential Concepts of Chemistry (5) |
The minor may be satisfied by a minimum of 21 units (not including prerequisite units) distributed as follows:
Courses | Units | |
Core Requirements | 15 | |
ENGR 102 | Statics | |
ENGR 201 | Dynamics | |
ENGR 235 | Surveying | |
ENGR 304 | Mechanics of Fluids | |
ENGR 309 | Mechanics of Solids | |
Electives (Approved upper division Civil Engineering courses) | 6 | |
Total (not including prerequisites) | 21 |
To earn the Minor in Civil Engineering, a student must complete at least 12 of the required 21 core and elective units at SFSU. Each of the courses in the minor must be taken for a letter grade (CR/NC is not acceptable).
The purpose of the Minor in Computer Engineering is to give students who are interested in the computer technology a good basic knowledge in software development, digital electronics, computer organization, and microprocessor applications. Additional knowledge in computer networks, multimedia systems, real-time systems, etc. may be acquired through electives. Students interested in the Computer Engineering minor must meet with the Program Head of Electrical and Computer Engineering and complete the Computer Engineering Minor Program Approval Form. Revision of the form requires the approval of the Program Head.
The minor is intended for students who have satisfied the following prerequisite requirements:
MATH 226 | Calculus I (4) |
MATH 227 | Calculus II (4) |
MATH 228 | Calculus III (4) |
MATH 245 | Elementary Differential Equations and Linear Algebra |
PHYS 220/222 | General Physics with Calculus I & Laboratory (4) |
PHYS 230/232 | General Physics with Calculus II & Laboratory (4) |
CSC 210 | Introduction to Computer Programming (3) |
CSC 212 | Introduction to Software Development in Unix (2) |
The minor may be satisfied by a minimum of 21 units (not including prerequisite units) distributed as follows:
Courses | Units | |
Core Requirements | 15 | |
CSC 213 | Fundamentals of Computer Science | |
ENGR 205 | Electric Circuits | |
ENGR 206 | Circuits and Instrumentation Laboratory (1) | |
ENGR 356 | Basic Computer Architecture | |
ENGR 357 | Basic Digital Laboratory (1) | |
ENGR 478 | Design with Microprocessors (4) | |
Electives (Approved upper division Computer Engineering courses) | 6 | |
Total (not including prerequisites) | 21 |
To earn the Minor in Computer Engineering, a student must complete at least 12 of the required 21 core and elective units at SFSU. Each of the courses in the minor must be taken for a letter grade (CR/NC is not acceptable).
The purpose of the Minor in Electrical Engineering is to give students in other fields of study a good basic background in Electrical Engineering. The 16-unit core provides an introduction to four basic areas of modern Electrical Engineering – basic electrical circuit theory, electronics, linear signals and systems, and digital logic and computer architecture. Elective courses provide opportunities for additional breadth or depth in a particular area. Students interested in the Electrical Engineering minor must meet with the Program Head of Electrical and Computer Engineering and complete the Electrical Engineering Minor Program Approval Form. Revision of the form requires the approval of the Program Head.
The minor is intended for students who have satisfied the following prerequisite requirements:
MATH 226 | Calculus I (4) |
MATH 227 | Calculus II (4) |
MATH 228 | Calculus III (4) |
MATH 245 | Elementary Differential Equations and Linear Algebra |
PHYS 220/222 | Physics I with Calculus (4) |
PHYS 230/232 | Physics II with Calculus (4) |
The minor may be satisfied by a minimum of 22 units (not including prerequisite units) distributed as follows:
Courses | Units | |
Core requirements | 16 | |
ENGR 205 | Electric Circuits | |
ENGR 206 | Circuits and Instrumentation Laboratory (1) | |
ENGR 305 | Linear System Analysis | |
ENGR 315 | System Analysis Laboratory (1) | |
ENGR 353 | Electronics | |
ENGR 301 | Electronics Laboratory (1) | |
ENGR 356 | Basic Computer Architecture | |
ENGR 357 | Basic Digital Laboratory (1) | |
Electives (Approved upper division Electrical Engineering courses) | 6 | |
Total | 22 |
To earn the Minor in Electrical Engineering, a student must complete at least 12 of the required 22 core and elective units at SFSU. Each of the courses in the minor must be taken for a letter grade (CR/NC is not acceptable).
The purpose of the Minor in Mechanical Engineering is to give students from science and other branches of engineering the opportunity to learn the fundamentals of mechanical engineering, to broaden their understanding of science and engineering, and to prepare them for new technological developments such as material science and nanotechnology. Additional knowledge in control and robotics, mechanical design, or thermal-fluids may be acquired through electives. Students interested in the Mechanical Engineering minor must meet with the Program Head of Mechanical Engineering and complete the Mechanical Engineering Minor Program Approval Form. Revision of the form requires the approval of the Program Head.
The minor is intended for students who have satisfied the following prerequisite requirements:
MATH 226 | Calculus I (4) |
MATH 227 | Calculus II (4) |
MATH 228 | Calculus III (4) |
MATH 245 | Elementary Differential Equations and Linear Algebra (3) |
PHYS 220/222 | Physics I with Calculus (4) |
PHYS 230/232 | Physics II with Calculus (4) |
The minor may be satisfied by a minimum of 21 units (not including prerequisite units) distributed as follows:
Courses | Units | |
Core requirements | 15 | |
ENGR 102 | Statics | 3 |
ENGR 200 | Materials of Engineering | 3 |
ENGR 201 | Dynamics | 3 |
ENGR 303 | Engineering Thermodynamics | 3 |
ENGR 309 | Mechanics of Solids | 3 |
Electives (Approved upper division Mechanical Engineering courses) | 6 | |
Total | 21 |
To earn the Minor in Mechanical Engineering, a student must complete at least 12 of the required 21 core and elective units at SFSU. Each of the courses in the minor must be taken for a letter grade (CR/NC is not acceptable).
Applicants must hold a bachelor's degree in engineering, or a closely related discipline, with a minimum GPA of 2.5 in upper division major classes, in addition to meeting general university requirements for graduate standing. The School of Engineering also requires two letters of recommendation from persons familiar with the student's previous academic work or professional accomplishments.
The applicant is advanced to candidacy when the Graduate Approved Program (GAP) has been signed and approved by the Dean of the Graduate Division.
Level One: is satisfied by passing either the Graduate Essay Test (GET) which is administered by the university Testing Center or an approved English writing course. Level Two: is satisfied by the completion of a written thesis (ENGR 898) or research project (ENGR 895).
The program is based on 30 semester units. It includes nine units of required courses, six units for individual research and thesis, and a minimum of fifteen units of electives. Among the electives, no more than six units are to be taken from areas other than engineering, and they must be consistent with the overall career objectives of the student as provided in the program of study. At least 21 units must be earned in graduate level courses.
Required Courses | Units | |
ENGR 800 | Engineering Communications | 3 |
ENGR 801 | Engineering Management | 3 |
ENGR 803 | Applied Probability and Statistics for Engineers | 3 |
Engineering Electives | ||
Units selected on advisement from the following: | 9-18 | |
ENGR 828 | Advanced Stress Analysis | |
ENGR 830 | Finite Element Methods in Structural and Continuum Mechanics | |
ENGR 833 | Principles of Earthquake Engineering | |
ENGR 834 | Hazardous Waste Management | |
ENGR 835 | Advanced Steel Structures | |
ENGR 836 | Structural Design for Earthquakes | |
ENGR 837 | Geotechnical Earthquake Engineering | |
ENGR 838 | Environmental Engineering Information Systems | |
ENGR 839 | Water Pollution Control Engineering | |
ENGR 840 | Power Systems Simulation and Control | |
ENGR 841 | Power Systems Transients and Stability | |
ENGR 842 | Design with Digital Integrated Circuits | |
ENGR 845 | Motion Control Technology | |
ENGR 846 | Power Quality Issues: Problems and Solutions | |
ENGR 847 | Switching Mode Power Supply Design | |
ENGR 850 | Parallel Processing | |
ENGR 851 | Advanced Microprocessor Architecture | |
ENGR 852 | Advanced Digital Design | |
ENGR 853 | Advanced Topics in Computer Communication and Networks | |
ENGR 854 | Wireless Data Communication Standards | |
ENGR 855 | Advanced Wireless Communication Technologies | |
ENGR 860 | Advanced Engineering Design: The Human Interface | |
ENGR 862 | Deformation and Fracture of Materials | |
ENGR 865 | Mechanism Synthesis and Analysis | |
ENGR 866 | Engineering Aspects of Air Pollution | |
ENGR 890 | Graduate Seminar | |
Non-Engineering Electives Courses, either graduate or upper division, selected primarily from science, mathematics, social science, or business, upon approval of the graduate coordinator. |
0-6 | |
Culminating Experience Units selected from one of the options below |
3-6 | |
Option A | ||
ENGR 897 | Research | |
ENGR 898 | Thesis [thesis may not be started until completion of 12 units of graduate course work and ENGR 897] | |
Option B | ||
ENGR 895 | Applied Research Project [project may not be started until completion of 12 units of graduate course work] | |
Minimum total | 30 |
NOTE: Engineering electives are number-coded as follows: 820-839 are civil, 840-859 are electrical, and 860-879 are mechanical engineering.
1600 Holloway Avenue, San Francisco, CA 94132 (415) 338-1111
Last modified July 06, 2012 by bulletin@sfsu.edu