When things go wrong:

No image through the projector:

Is the console MAIN POWER SWITCH ON?
Is the projector in the right MODE (INPUT 3 FOR VIDEO or INPUT 1 FOR LAPTOP)?
If you are using equipment in the console (VCR/DVD, Video Overhead or Cablecast) is the proper button on the INPUT SELECTOR pressed?
If you are using the Video Overhead, the Input Light out should be off. If it is on, press the Input button below the light until it goes out.
If you are using the VCR/DVD player, check that there is a small green light under the player you are using. If the light is not on, press the VCR/DVD button in the middle of the player.

No Sound:

Is the Amplifier on?
Is the Master Volume at 12:00 and the AV1 Input at 9:00 or higher?
Is there audio on the tape?
Is the volume up on your laptop?

The computer image is cut off or jumping:

If the computer image is cut off or jumping, press the AUTO PC ADJ button on the PROJECTOR CONTROL BOX. It will take a moment.
If that does not work, shut down and restart the LAPTOP.

Can't log on to the internet:

The server may be down or the jack in the room may be down. Call 81494 to have someone come out and check it. No quick fix available.

Return to the Start Page