Using the Wireless Microphone in the Console:

Turn on the CONSOLE MAIN POWER Switch located in the upper right corner of the equipment rack.

Using your Keypad Access Code, open the console door and pull out the microphone drawer.

Unplug the microphone transmitter from the charger cable.
There is no spare battery or microphone.

Check that the red switch on top is set to TALK.

Press and hold the POWER button on the front of the transmitter until you see the display turn on.

Clip the microphone to your lapel and the transmitter to your waist.

Locate the silver knob under the VCR labeled WIRELESS MIC VOLUME. Turn it slowly to the right until the required volume is set.

TO SHUT DOWN: Press and hold the POWER button on the microphone until the display shuts off.
Place it back in the drawer and PLUG IT IN TO THE CHARGING CORD.
Slide the drawer back into the console and shut the door. Turn the WIRELESS MIC VOLUME knob off.
Turn off the CONSOLE MAIN POWER Switch.

Return to the Start Page