To use a Laptop with this Console:

MAKE SURE YOUR LAPTOP IS TURNED OFF

Turn on the CONSOLE MAIN POWER Switch located in the upper right corner of the equipment rack.
The Extron box lights will cycle as it powers up.

Locate the white Extron box mounted on the front of the console.
Press the PROJECTOR ON button ONCE. The projector will take about 25 seconds to warm up.

Press the LAPTOP button.

Open the console door.
Pull out the computer shelf and locate the VGA cable.
Connect it to your laptop MONITOR OUT connector.

Turn on the laptop LAST.
To Shut Down the System:
Disconnect the VGA cable from your laptop, slide the computer shelf back into the console and shut the door.
Press the PROJECTOR OFF button ONCE.
Turn off the CONSOLE MAIN POWER Switch.

Return to the Start Page